Audi Coupe GT (1982–1987) ZLED Tail Light Conversion

Custom LED Development & Retrofit Service

The Audi Coupe GT ZLED Tail Light Conversion is a custom development and retrofit project designed to upgrade the original 1982–1987 Audi Coupe GT tail light assemblies with modern LED technology.

Unlike our established ZLED conversions, this project requires new design, development, and manufacturing of custom components before the final retrofit can be completed.

Due to the custom nature of this project, the service is divided into three separate payments, each corresponding to a specific development or production milestone.

🚨 Important: Do Not Purchase Unless Instructed by ZLEDS

This listing is exclusively for customers who have already discussed their project with ZLEDS and received authorization to proceed.

Do not purchase this service without prior approval from ZLEDS.

💳 Three-Stage Payment Structure

The total project cost is divided into three separate payments, corresponding to the development, manufacturing, and completion stages.

🔹 First Payment: Design & Development

Payment: Approximately 33% of the total project cost.

The first payment authorizes ZLEDS to begin designing and developing the custom tail light conversion.

This stage includes initial planning, circuit board design, LED configuration, mounting solutions, and preparation for manufacturing.

Payment Instructions:

• ZLEDS will provide a unique discount code to adjust the checkout total for the initial installment.
• Shipping charges will be removed from this payment.
• Design and development processing begins after payment is received, subject to the production queue.

🔹 Second Payment: Custom Parts Manufacturing

Payment: Approximately 33% of the total project cost.

Once the design and development stage is completed, ZLEDS will notify the customer that the project is ready for custom parts manufacturing.

This stage includes manufacturing custom circuit boards, sourcing electronic components, producing mounting hardware, and preparing the required parts for the conversion.

Payment Instructions:

• ZLEDS will provide a unique discount code for the second installment.
• Shipping charges will be removed from this payment.
• Custom parts manufacturing begins after the second payment is received and the project is scheduled for production.

🔹 Third & Final Payment: Completed Retrofit & Return Shipping

Payment: Remaining project balance (approximately 33%) + return shipping postage.

After the custom components have been manufactured and the actual tail light retrofit conversion has been completed, ZLEDS will notify the customer that their project is ready for return shipment.

Payment Instructions:

• The customer will receive instructions to complete the final remaining balance.
• Return shipping postage will be added to the final payment.
• The completed tail light assemblies will be shipped after the final payment and return postage have been received in full.

Return shipping is charged only once, during the final payment.

---

⚠️ Additional Payment Conditions

• All service payments are non-refundable, subject to applicable law.
• Each payment is required before the corresponding project stage begins, except the final payment, which is due after the retrofit is completed.
• Unique discount codes are provided directly by ZLEDS and are intended only for their authorized payment installments.
• Shipping discounts applied to the first two payments do not represent prepaid return shipping.
• Customers must complete each requested payment within the applicable payment deadline.
• Failure to respond or complete required payments may result in cancellation of the production queue position and forfeiture of previously submitted payments, subject to applicable law.

Full Terms & Conditions, Limited Warranty & Disclaimer:

https://zledslights.com/contact/limited-warranty-and-disclaimer/

⚠️ Service Payment Terms & Conditions

• All service payments are non-refundable. Please confirm your intent before proceeding with any payment.
• Custom R&D processing: This project involves new design, development, and manufacturing. Processing times may vary depending on project complexity, component availability, and production workload.
• Production queue priority: Standard retrofit orders are prioritized over custom R&D builds due to their shorter turnaround times.
• Separate payment milestones: Each payment authorizes the corresponding stage of the project. The customer will be notified when the next payment is required.
• Email notifications: All payment requests and project updates will be communicated through the email address associated with the customer's order.
• Payment deadlines: Customers must respond to follow-up notifications and complete requested payments within the applicable payment deadline. Failure to do so may result in cancellation of the project's position in the production queue and forfeiture of previously submitted non-refundable service payments, subject to applicable law.
• Additional development charges: If unforeseen design, programming, manufacturing, or material requirements arise, additional charges may apply. These charges will be communicated before the affected work proceeds.
• Project modifications: Changes to the agreed design, functionality, or scope after development has begun may require additional charges.
• Production timelines: Due to the custom nature of the project, estimated completion times are not guaranteed.
• Return shipping: Return shipping postage is not included in the development and retrofit payment installments unless otherwise specified. Applicable return shipping charges are collected with the final payment after project completion.

📦 Shipping Instructions (Original Tail Light Assemblies)

If your project requires sending original Audi Coupe GT tail light assemblies to ZLEDS for development or retrofit, please follow the instructions below.

Do not ship your assemblies until instructed by ZLEDS.

1. Carefully package the assemblies to prevent damage during transportation.
2. Include a printed note inside the package with:
   • Your full name
   • Your return shipping address
   • Your ZLEDS order number
3. Ship your package to:

ZLEDS
2330 E. Freddy Gonzalez Dr
PMB 50
Edinburg, TX 78542
USA

Customer-Supplied Assemblies

Original tail light assemblies supplied by the customer may have age-related wear, brittle plastic, deteriorated seals, or previous repairs.

Due to the age and condition of these components, disassembly and modification may involve additional risks.

Customers are responsible for ensuring their assemblies are in suitable condition before shipment. Please refer to the full ZLEDS warranty and customer-supplied items disclaimer for additional information regarding these risks and responsibilities.

📋 Full Terms & Conditions, Warranty & Disclaimer

By purchasing this service or submitting any of the required payments, the customer acknowledges and agrees to the applicable ZLEDS Terms & Conditions, Limited Warranty, Shipping Policies, Service Payment Terms, and Liability Disclaimers, subject to applicable law.

These policies cover:

• Non-refundable service payments and cancellation conditions.
• Custom development and production scheduling.
• Customer-supplied assemblies and associated modification risks.
• Shipping responsibilities and damaged shipment procedures.
• Limited warranty coverage and exclusions.
• Product usage disclaimers and limitations of liability.

Please review the complete terms and conditions before proceeding with payment:

🔗 ZLEDS Full Terms & Conditions, Limited Warranty & Disclaimer

Submission of payment constitutes acknowledgment and acceptance of the applicable terms, subject to applicable law.

📝 Please Note

This listing represents a custom design, development, manufacturing, and retrofit service, not an immediately available, ready-to-ship product.

The initial payment authorizes the start of project development according to the production schedule. Subsequent payments are requested as the project advances through its manufacturing and completion milestones.

The final payment and return shipping postage are collected only after the retrofit conversion has been completed.

All custom work is subject to the agreed project specifications, available components, and ZLEDS production scheduling.

🚨 Do Not Purchase Unless ZLEDS Has Instructed You to Proceed.